Jaw Crusher

VSI Series Vertical Shaft Impact Crusher is also called Sand Maker, which is high-functioned equipment for making sand and shaping, is researched and produced by our corporation, absorbed with the advanced technology from Germany, and owned advanced world standards. This equipment has two types: rock-on-rock and rock-on-iron. Sand yield of "rock-on-iron" type is higher by 10-20% than that of "rock-on-rock" type. Material falls down into high rolling impeller cavity vertically through the upper part of machine. Under great centrifugal force, it hits and crushes another part of material that distributing around the impeller with umbrella form. After hitting each other, they force a vortex between impeller and shell, and hit each other several times; finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported by conveyor belt. However overlarge material will go back to VSI Series Vertical Shaft Impact Crushers to be re-crushed. Otherwise, output sizes can be also adjusted according to customer's requirement.

Model	Max Feed Size(mm)	Speed of Rotor(r/min)	Capacity(t/h)	Motor Power(Kw)	Overall Dimensions(L×W×H)(mm)	Weight(Kg)
VI-3000	45 (70 )	1760-2210	30-60	55-90	3080×1757×2126	≤5555
VI-4000	55 (70 )	1550-1940	50-90	110-150	4100×1930×2166	≤7020
VI-5000	65 (80 )	1330-1670	80-150	150-220	4300×2215×2427	≤11650
VI-6000	70 (100 )	1190-1490	120-250	220-320	5300×2728×2773	≤15100
VI-7000	70 (100)	1050-1310	180-350	264-400	5300×2728×2863	≤17090
VI-8000	70(100)	1330-1670	250-380	320-440	5500×2565×3178	≤18495
VI-8000(II)	80(150)	940-1170	320-600	440-630	6000×3022×3425	≤24610
VI-9000	100 (150)	880-1100	400-1000	630-740	6200×3300×3890	≤33100